Home
 Buy Parts On-Line   contact us   scroll systems   coil systems   customer service   company information 
    Overview     |     Scroll Sheeting Systems     |     Components & Upgrades     |     Individual Components     |     Preventive Maintenance Packages
 
Systems

RSL-1 Cutting Line

LM-1E System >

LM-2E System

BR-4E System

BR-5E System

BR-5ER System

Each Littell Scroll Sheeting System offers a durable, efficient solution to the specific demands of the container industry.

Click here to contact our Scroll Sheeting Representatives.		 New LM-1E Scroll Sheeting System

\/ Available Options

The LM-1E system can be used for scroll or straight shearing. This line includes:

  • 13.6 Metric Capacity Uncoiler, Coil Car and Downender
  • Visual Inspection Station, Thickness Gauge and Pinhole Detector
  • Straightener - Sixteen (16) Roll, Small Diameter/Close Centers
  • Littell's Standard Under-Driven Cut-Off Machine with Electronic Feed
  • Three (3) Station Heavy-Duty Stackers (two prime - one reject) with Powered Discharge Conveyor
LM-1E Specifications
Material Tinplate, Blackplate, TFS, and Aluminum in tempers normally associated with standard can making materials.
Plate Thickness Range 0.13 mm to 0.50 mm
Strip Width Range 610 mm to 1250 mm
Sheet Length Range 457 mm to 1200 mm
Maximum Coil Weight 13.6 Metric Tons
Coil I.D. 419 mm nominal
Reel Arbor Expansion 381 mm to 445 mm
Maximum Coil O.D. 1828 mm maximum
Minimum Coil O.D. 914 mm
Standard Feeding Range 457 mm to 1200 mm
Sheet Length Tolerance and Production* A 457 mm to 914 mm long sheets can be cut at a rate of up to 100 sheets per minute with a centerline dimension deviation of no more than plus/minus 0.18 mm.
B 914 mm to 1200 mm long sheets can be cut at a rate of up to 100 meters per minute (MPM/length = SPM) with a centerline dimension deviation of no more than plus/minus 0.18 mm.
Line Speed Range* 50 to 100 sheets per minute
(100 meters per minute)
Direction of Feeding Right to Left
Bundle Size 2268 kg maximum weight
Bundle Height 457 mm maximum stack height
over a 89 mm pallet
* Items may vary according to sheet length, material gauge and temper.


Options Available

• Quick Die Change: hydro-mechanical clamps used in conjunction with the die cart and air bolster provides fast, easy changeover, resulting in increased uptime.

• Remote Diagnostic System allows Littell engineers to update and troubleshoot from any location worldwide via telephone modem.

• Data Reporting Package: Fluid® Production and Paqtools® statiscal analysis software (registered trademark of Transworld SAT, Versailles, France).
TransWorld SAT

• Automated Piler Side Guides and End Stops

• Edge Trimmer



^ Back to Top
© copyright 2002-2007 Littell, LLC