Littell Scroll Sheeting Systems: BR-4E

Buy Parts On-Line

scroll systems

coil systems

customer service

company information

Overview | Scroll Sheeting Systems | Components & Upgrades | Individual Components | Preventive Maintenance Packages

Systems

BR-4E System >

BR-4E Scroll Sheeting System

\/ Available Options Typical Floorplan >

The BR-4E System can be used for scroll or straight shearing. This line consists of the units described and shall receive the coil with bore vertical, downend, lift, traverse and place the coil on the payoff reel.

The line will then uncoil, straighten, inspect, cut-to-length, sort and pile both rectangular and scrolled sheets from coils of the following specifications, in accordance with the following operational requirements.

BR-4E Specifications
Material	Tinplate, Blackplate, TFS, and Aluminum in tempers normally associated with standard can making materials.
Plate Thickness Range	0.13 mm to 0.50 mm
Strip Width Range	610 mm to 1250 mm
Sheet Length Range	559 mm to 1200 mm
Maximum Coil Weight	13.6 Metric Tons
Coil I.D.	419 mm nominal
Reel Arbor Expansion	381 mm to 445 mm
Maximum Coil O.D.	1828 mm maximum
Minimum Coil O.D.	914 mm
Standard Feeding Range	559 mm to 1200 mm
Sheet Length Tolerance and Production*	A	559 mm to 914 mm long sheets can be cut at a rate of up to 175 sheets per minute with a centerline dimension deviation of no more than plus/minus 0.18 mm.
	B	914 mm to 1200 mm long sheets can be cut at a rate of up to 137 meters per minute (160 MPM/length = SPM) with a centerline dimension deviation of no more than plus/minus 0.18 mm.
Line Speed Range*	50 to 200 sheets per minute (180 meters per minute)
Direction of Feeding	Right to Left
Bundle Size	2268 kg maximum weight
Bundle Height	457 mm maximum stack height over a 89 mm pallet
* Items may vary according to sheet length, material gauge and temper.

Options Available

• Quick Die Change: hydro-mechanical clamps used in conjunction with the die cart and air bolster provides fast, easy changeover, resulting in increased uptime.

• Remote Diagnostic System allows Littell engineers to update and troubleshoot from any location worldwide via telephone modem.

• Data Reporting Package: Fluid® Production and Paqtools® statiscal analysis software (registered trademark of Transworld SAT, Versailles, France).
TransWorld SAT

• Automated Piler Side Guides and End Stops

• Edge Trimmer

^ Back to Top